In recent times, the desire for gentle skin treatments has grown a lot. People want good solutions that don’t require much recovery time. New beauty technologies offer great outcomes without needing surgery, from smoothing out fine lines to making skin tone better.
Among these new ideas, fractional CO₂ laser treatment has become a top way for making the face and neck look younger. It is a favorite for both patients and doctors because it can put energy into the skin very precisely and in a controlled way.
What Is Fractional CO₂ Laser Technology
The whole idea of fractional CO₂ laser technology is based on sending out laser energy in a broken-up pattern. A Fractional CO2 Laser System shoots a laser beam that gets divided into many tiny light beams. This creates small dot-like treatment areas only where they are needed. What’s more, this method allows for focused treatment while leaving the healthy skin around it alone.
The laser works on three different levels of tissue reaction. First, there’s the ablated zone where tissue is vaporized and taken away. Then, there’s a coagulation zone where tissue dies from heat damage that can’t be reversed. And finally, a third heated zone makes collagen tighten up and remodel without causing cell death.
This fractional method has many benefits for skin renewal. It lets the skin heal much more quickly than if the entire area were treated. A lot of collagen is made while the skin repairs itself, which helps rejuvenate it. In the end, the skin will look much more vibrant and youthful.
How Fractional CO₂ Laser Helps Reduce Wrinkles
One of the main uses of CO2 laser treatment is for lessening wrinkles. The way it works involves both skin removal and heat stimulation. When the laser reaches the dermis layer, the carbon dioxide laser changes light energy into heat. This heat goes deep into the collagen tissue, encouraging it to regrow. Thus, it brings back the skin’s bounce and achieves the goal of removing wrinkles and refreshing the skin.
This stimulation starts a process of making new collagen, which smooths out wrinkles and fine lines as time goes on. The process also makes the whole skin structure better by rearranging collagen fibers and improving elasticity.
Besides that, CO2 laser treatment helps fix uneven skin color and rough texture on both the face and neck. Among its clear benefits are wrinkle removal, skin rejuvenation, and fixing problems like large pores and skin overgrowth.
Treatment Process for Face and Neck Rejuvenation
For the best results with fractional CO₂ laser therapy on the face and neck, doctors follow a step-by-step way that starts with getting ready carefully.
Patients are told to stay out of the sun and stop taking certain medicines before their visit. A cream to numb the skin might be used to make the session less painful.
During the treatment, the system makes things easier by providing pre-set options for operation and laser delivery. This allows doctors to change the settings for each person’s needs. The handpiece creates tiny thermal zones over the target spots. It uses scanning patterns like a square or circle to make sure the whole area is treated smoothly.
What you do afterward is very important for recovery. Patients might have some mild redness or swelling, kind of like a sunburn, for a couple of days. Key advice during this time is to use calming lotions and stay out of direct sunlight.
The number of treatments you need can change. It depends on your age, how deep the wrinkles are, and what you want to achieve. Usually, 1 to 3 sessions, with a few weeks in between each, bring results you can see.
Advantages of Using Fractional CO₂ Laser for Anti-Aging
Compared to older resurfacing methods that treated whole layers of skin at once, fractional CO₂ lasers mean much less recovery time. The ultra-pulse CO2 laser boosts the laser’s peak power to try and prevent harm to nearby tissues. This makes recovery quicker while still getting good results.
It’s also very precise. This is another big plus. Doctors can change the pulse length to accurately target both deep wrinkles and shallow fine lines. The system’s flexibility also allows for different scan patterns that work well for the delicate curves of the face or the wider neck area.
Furthermore, you can customize the density of the laser points for different treatment goals with adjustable energy levels and spot sizes from 0.1 mm to 2 mm. So, this makes it a good fit for many skin types.
Considerations Before Choosing CO₂ Laser Treatment
Before getting CO2 laser treatment, patients should talk to a qualified expert. They can see if it’s right for you based on your health history and skin goals.
During the procedure, it’s normal to feel things like warmth or tingling. These are usually not too bad because of the numbing cream used beforehand. Some patients say they feel a little bit of discomfort when the laser is set to go deeper, but this doesn’t last long.
After the treatment, you might have redness, swelling, or sensitive skin for a few days, depending on how strong the settings were. Risks like long-lasting redness, infection, changes in skin color, or scarring are lowered with the right methods and by following aftercare instructions.
There are reasons you shouldn’t get this treatment. These include being pregnant, having been in the sun recently (within a month), having open wounds or infections, or active skin problems like psoriasis or vitilo. Also, you can’t have this treatment if you are using oral medicines that make you sensitive to light, such as isotretinoin.
MQLASER: A Trusted Supplier of Fractional CO₂ Laser Equipment
Since 2010, Beijing Mingqiao Technology Co., Ltd., which is known as MQLASER, has been focused on improving beauty technology with their mission: “Bringing Beauty and Love by Technology.”
Their machines have modern features that make sure they are safe, exact, and simple to use:
DEPPLUS® Stationary Fractional CO2 Laser Machine
Wavelength：10600nm; Treatment：Skin rejuvenation、 Wrinkles removal、Scar repair、Vaginal care etc。 It has a 7-joint articulated arm that can turn 360°, and a 60W-100W METAL RF TUBE that provides steady energy for a long time. The simple interface makes it easy to customize settings on a touch screen.
DIATERMOLOGIE® Portable Co2 Laser Beauty Machine
This portable machine is great for clinics that need to move equipment around but still want high performance. It supports a fractional mode and also has cutting functions. It comes with easy-to-use software, pre-set working modes, the ability to check for problems remotely, and has CE/FDA/ISO13485 certifications.
MQLASER’s presence around the world is backed by great training materials. These include manuals, how-to videos for putting accessories together, setup guides, and one-on-one video training online when it’s needed.
FAQs:
Q1: What areas can be treated with fractional CO₂ laser?
A: Fractional CO₂ lasers are very flexible tools. They are used not just for the face and neck but also for other body parts like hands or the chest. Some uses include removing dark spots, getting rid of wrinkles, fixing scars (like from acne or surgery), and vaginal tightening.
Q2: How long does it take to see results after the treatment?
A: You usually start to see changes within one week after the treatment as the first redness goes away. The rebuilding of collagen keeps going for several weeks. This leads to smoother skin and fewer wrinkles in about 1 to 3 months, depending on how each person heals.
Q3: Is the treatment painful or uncomfortable?
A: Most people handle CO2 laser treatment just fine because a numbing cream is put on before it starts. High-quality laser points help make the experience painless. You might feel some warmth or tingling, but that usually goes away soon after the session.
